PSI Catalog

Can't Find What You're Looking For?

For PSI part numbers, a complete list of all PSI offerings, and more information, please see the current PSI Catalog!


15K Turbo Nozzle Assemblies
Turbo Nozzles provide the most thorough cleaning of tube walls with maximum impact without streaking. This nozzle also integrates backward-facing orifices that propel them though hard deposits on the I.D. of pipes and tubes. At the same time, part of the nozzle rotates and polishes the pipe’s I.D. We offer custom flow rates for your special applications. Turbo nozzle or blanks are used to cap the end of the nozzle (sold separately). Parts that are worn can be replaced in the field within five minutes with a simple rebuild kit minimizing downtime.

         ❚ Select an assembly and corresponding blank. Replacement sleeves and assembly bodies also available. Contact PSI for replacement parts.


10-15K Monro- Jet Orbital
PSI proudly offers the Monro-Jet orbital nozzles in a wide variety of flows and pressure ratings to suit your application. 3/8” NPT inlet threads are available upon request Please specify orifice size and flow when ordering.


15K Large Tungsten Carbide Nozzle Assembly
PSI offers these special large tungsten carbide hard-hitter nozzles for use in high flow applications where a solid stream of water is required for big cleaning jobs such as in paper mills, power plants, tube bundle cleaning, tank cleaning and reactor vessels. These 3/4” threaded NPT nozzle holders come in a standard 2-3/4” long assembly, and available in a shorter 2-1/8” long holder. The carbide insert comes in 11 different orifice sizes to suit your applications.

15K 1/2” NPT Large Ultra-Polished
PSI offers these special ultra-polished nozzles for use in high flow applications where a straight jet of water is required for large cleaning applications. These are often used with shellside cleaners, but have many other uses. These 1/2” NPT threaded nozzle holders come in a female assembly or a male assembly. The carbide insert comes in 12 different orifice sizes to suit your flow and pressure requirements.

15K 1/4" MNPT Tungsten Carbide Hard Hitter
Tungsten Carbide Hard Hitter nozzles are designed especially for use with hand- held control guns for superior surface cleaning. All are made of stainless steel with tungsten carbide orifice inserts, flow straightening vanes, and wrench flats for easy installation. Replaceable carbide inserts are also available.


15K APLM Pineapple Line Mole
The APLM pineapple-type line mole nozzles are made from stainless steel with a special copper coating to prevent galling during installation. APLM nozzles have 1” NPT inlets with 1/4” NPT (F) ports, and a choice of port locations. These are used with line mole inserts listed on the next page. Wrench flats allow for easy installation.


15K BPLM Pineapple Line Mole
The BPLM pineapple-type line mole nozzles are made from stainless steel with a special copper coating to help prevent galling during installation. BPLM nozzles have 1/2” NPT or 3/4” NPT inlets with 1/4” NPT (F) ports, and a choice of port locations. These are used with line mole inserts listed on the next page. Wrench flats allow for easy installation.


15K CPLM Pineapple Line Mole
The CPLM pineapple-type line mole nozzles are made from stainless steel with a special copper coating to prevent galling during installation. CPLM nozzles have 1/2” NPT inlets with 1/4” NPT (F) ports, and a choice of port locations. These are used with line mole inserts listed on the next page. Wrench flats allow for easy installation.


15K DPLM Pineapple Line Mole
The DPLM pineapple-type line mole nozzles are made from stainless steel with a special copper coating to prevent galling during installation. DPLM nozzles have 3/4” NPT inlets with 1/8” NPTF ports, and a choice of port locations. These are used with line mole inserts listed on the next page. Wrench flats allow for easy installation.


15K EPLM Pineapple Line Mole
The EPLM pineapple-type line mole nozzles are made from stainless steel with a special copper coating to prevent galling during installation. EPLM nozzles have 1/2” NPT inlets with 1/16” NPT (F) ports, and a choice of port locations. These are used with line mole inserts listed on the next page. Wrench flats allow for easy installation. 


20K Standard Nozzles with Tungsten Carbide Blade
The tungsten carbide tipped tube nozzles are to be used in rotary applications for the removal of hardened plugs in heat exchanger tubes. Please specify drilling pattern, pressure and flow when ordering.

20K Control Gun Nozzle Holders for Drop-In Nozzles
PSI’s quick-change 9/16” MP (F) Nozzle Holders for control guns are designed to accommodate the TC Drop-In Tips common to shotgun cleaning applications. Simply unscrew the cap and drop in the appropriate nozzle for the job.

20K Drop-In Tungsten Carbide Fan Tip
The TC Drop-In Fan-Tip Nozzles are compact inserts made to drop into the typical quick-change nozzle holder body common to shotgun cleaning applications

20K Drop-In Tungsten Carbide Hard Hitter
The TC Drop-In Hard-Hitter Nozzles are compact inserts made to drop into the typical quick-change nozzle holder body common to shotgun cleaning applications.


20K High-Performance Sapphire Insert Assemblies
The High-Performance Sapphire Nozzle into the typical nozzle jewel screw Inserts are compact inserts made to drop common to jetting applications.


20K High-Performance Sapphire Orifice Insert
The High-Performance Sapphire Orifice Nozzle Inserts are compact inserts made to drop into the typical nozzle jewel screw common to jetting applications. Please specify orifice size, pressure and flow when ordering.


20K Monro-Jet Orbital
PSI proudly offers the Monro-Jet orbital nozzles in a wide variety of flows and pressure ratings to suit your application. 9/16”-18 RH and M14 x 1.5LH inlet threads are available upon request. Please specify orifice size and flow when ordering.


40K Patented High-Performance Sapphire Orifice Assemblies
The High-Performance Sapphire Nozzle Assemblies are compact inserts made to screw into the most typical UHP rotary nozzle holder bodies common to UHP cleaning applications.


40K High-Performance Sapphire Orifice Insert
The High-Performance Sapphire Orifice Nozzle Inserts are compact inserts made to drop into the typical nozzle jewel screw common to UHP jetting applications. Please specify orifice size, pressure and flow when ordering.


40K High-Performance Sapphire Insert Assemblies
The High-Performance Sapphire Nozzle Inserts are compact inserts made to drop into the typical nozzle jewel screw common to UHP jetting applications.


40K Button-Tip Tube Cleaning Nozzles with Sapphire Inserts
The Button-Tip Tube Cleaning Nozzles use the sapphire inserts listed on the previous page. These compact nozzles are made of hardened stainless steel and are ideal for most ultra-high pressure
rigid lance tube cleaning applications. Each requires the use of an “Admac style” brass button #101759 to attach to the rigid lance. Please specify orifice size, pressure, and flow when ordering.


40K Male Button-Tip Tube Cleaning Nozzles with Sapphire Inserts
The Male Button-Tip Tube Cleaning Nozzles use the sapphire inserts listed on the previous page. These rugged nozzles are made of hardened stainless steel and are ideal for most ultra-high pressure rigid lance tube cleaning applications. Each requires the use of an “Admac style” brass button #101759 to attach to the rigid lance. Please specify orifice size, pressure and flow when ordering. 


40K APLM Pineapple Line Mole Nozzles
The APLM Pineapple-Type Line Mole Nozzles are made from stainless steel with a special copper coating to prevent galling during installation. APLM nozzles have 9/16 and 3/4” NPT inlets with 1/4” or 3/8” NPT (F) ports, and a choice of port locations. These are used with line mole inserts listed on the next page. Wrench flats allow for easy installation. 


40K Carrier Nozzle


40K Radial Pancake Nozzle Assemblies
PSI offers a wide variety of sizes in “pancake style” nozzles for tube cleaning applications. Each is made of hardened stainless steel, features 4 jets @ 90° that use high pressure sapphire inserts, and the cut-outs on the 3” and above save a great deal of added weight. The largest is 6” wide. Please specify orifice size, pressure and flow when ordering.






​     

Call PSI Headquarters!

281-420-5055

Offerings

Nozzles (Arranged by Pressure)

Give our friendly, knowledgeable team a call and we'll be happy to help you find just the right product for your waterblasting needs! Visit our Contact page for a selection of PSI Team members to contact or call our headquarters to speak with a customer service representative.

15K AP Standard
The economical stainless-steel AP Standard style nozzles come in pressure ratings to match your flex or rigid lances. The 15K-AP features FNPT threads to go with lances with MNPT threads, a slimline design that makes it easy to move through almost any size of tubing, and a wide range of options for precision drilled orifices.

15K Evaporator
Evaporator stainless steel nozzles are used with rigid or flex lances with MNPT threads. The design permits a range of forward and side drilling patterns while the backwards facing ridge allows many pulling orifices to more efficiently clean fouled tubing. Wrench flats allow for easy installation.

15K FNPT
The FNPT nozzles are to be used in rotary applications for the removal of hardened plugs in heat exchanger tubes. This 15K nozzle NPT threads to go with lances with MNPT threads, a slimline design that makes it easy to move through almost any size of tubing, and a wide range of options for precision drilled orifices.

15K TLX
The stainless steel TLX nozzles come in pressure ratings to match your flex or rigid lances. The 15K-TLX features FNPT threads to go with lances with MNPT threads. All have wrench flats for easy installation on the lance. All offer many options for three or four rows of precision drilled orifices.

15K Multi-Groove
The high-production stainless steel Multi- Groove nozzles come in pressure ratings to match your flex or rigid lances. The 15K-MG features FNPT threads to go with lances with MNPT threads. The Multi-Grooves have wrench flats for easy installation on the lance, and offer many options for up to 4 rows of precision drilled orifices. Please specify drilling pattern, pressure and flow when ordering.


15K MMS
The stainless steel Male Machine Screw nozzles come in pressure ratings to match your flex or rigid lances with female machine screw threads (UNF or UNC). The compact 15K-MMS has a special slimline design that assures that the outside diameter matches the OD of the lance, and have wrench flats for easy installation. All offer many options for 3 or 4 rows of precision drilled orifices.

15K Button Tip Flex Lance
The Button-Tip compact stainless steel nozzles come in pressure ratings to match your flex lances. They are ideal for cleaning small diameter tubes with small radius bends. The 15K-BT features FNPT threads to go with lances with MNPT threads. All offer many options for precision drilled orifices.

15K Thruster
The Thruster stainless steel nozzles are used with flex lances in conjunction with another tube cleaning nozzle. It allows one to “stack” the nozzles so that additional jets can be used for a more thorough cleaning.

15K Penetrator
The Penetrator stainless steel nozzles are used with rigid or flex lances with MNPT threads. The rounded nose shape permits a range of forward and side drilling patterns while the backwards facing ridge allows many pulling orifices to more efficiently clean fouled tubing. Wrench flats allow for easy installation.

15K Standard Nozzles with Carbide Blade
Tungsten carbide tipped tube nozzles are to be used in rotary applications for the removal of hardened plugs in heat exchanger tubes.


15K 1/4” Meg. MNPT Hard Hitter
PSI’S 15K 1/4 Meg Hard Hitter Nozzles are engineered to bring exceptional power to control gun surface cleaning and cutting applications. The internal guide vane focuses flow for maximum performance. They are made from hardened stainless steel, and feature male NPT threads and wrench flats for easy installation.

10-15K 1/4" MNPT Standard 15° & 25° Fan Tip
PSI’s 10-15K Standard Fan Tip Nozzles are engineered to bring exceptional power to control gun surface cleaning applications. They are available in 15°, 25°, and 40°, made from hardened stainless steel, and feature male NPT threads and wrench flats for easy installation.


​15K 1/4" MNPT Tungsten Carbide 15° & 25° Fan Tip
PSI’s 15K TC Fan Tip Nozzles are engineered to bring exceptional power to control gun surface cleaning applications. They are available in 15° and 25°, made from hardened stainless steel inserted with a tungsten carbide orifice, and feature male NPT threads and wrench flats for easy installation.

15K 1/4" MNPT Gun Barrel Style Hard Hitter
PSI’s 15K Gun Barrel Hard Hitter Nozzles are engineered to bring exceptional power to control guns. Each is made from heat treated stainless steel, and features male NPT threads and wrench flats for easy installation. Please specify pressure and flow when ordering.

15K 1/2” MNPT Long Hard Hitter
The 1/2” NPT Long Hard Hitter nozzles offer an elongated orifice that holds a pattern longer than some of the shorter nozzles on the market. Great for hand-held shot gunning as well as mechanical cleaning tools such as shellside machines and tower cleaners.


10-15K Stainless Line Mole Nozzle Inserts


10-15K Tungsten Line Mole Nozzle Inserts


​20K MP Standard
The economical stainless-steel MP Standard style nozzles come in pressure ratings to match your flex or rigid lances. The 20K-MP Standard Nozzle is designed to go with lances with either right or left-hand Autoclave-type medium pressure threads, a special seating design that eliminates the requirement for gland nuts and collars, wrench flats for easy installation, and offer a wide range of options for precision drilled orifices. Please specify drilling pattern, pressure and flow when ordering.

20K MP Male Standard
The 20K-MP Male Standard Nozzle is designed to go with flex or rigid lances with either right or left-hand Autoclave-type medium pressure threads, a special seating design with wrench flats for easy installation, and offer a wide range of options for precision drilled orifices. Please specify drilling pattern, pressure and flow when ordering.

20K TLX
The stainless steel TLX Nozzles come in pressure ratings to match your flex or rigid lances. The 20K-TLX have Autoclave-type MP threads. All have wrench flats for easy installation on the lance. All offer many options for 3 or 4 rows of precision drilled orifices. Please specify drilling pattern, pressure and flow when ordering.

20K Button Tip
Button-Tip compact stainless-steel nozzles are ideal for cleaning small diameter tubes with small radius bends. The 20K-BT have Autoclave- type MP threads, and offer many options for precision drilled orifices. Please specify drilling pattern, pressure and flow when ordering. 


20K APLM Pineapple Line Mole
The 20K APLM Pineapple-type Line Mole Nozzles are made from stainless steel with a special copper coating to prevent galling during installation. APLM nozzles have 9/16 and 9/16 to 3/4” NPT inlets with 1/4” or 3/8” NPT (F) ports, and a choice of port locations. These are used with line mole inserts listed on the next page. Wrench flats allow for easy installation. 


20K Patented High-Performance Sapphire Orifice Assemblies
The High-Performance Sapphire Nozzle Assemblies are compact inserts made to screw into the most typical rotary nozzle holder bodies common to cleaning applications.
        ❚ All are 3/8”-24 RH.
        ❚ Please specify orifice size, pressure and flow when ordering. 


20K Turbo
Turbo Nozzles provide the most thorough cleaning of tube walls with maximum impact without streaking. This nozzle also integrates, backward-facing orifices that propel them though hard deposits on the I.D. of pipes and tubes. At the same time, part of the nozzle rotates and polishes the pipe’s I.D. We offer custom flow rates for your special applications. Turbo nozzle or blanks are used to cap the end of the nozzle (sold separately). Parts that are worn can be replaced in the field within five minutes with a simple rebuild kit to minimizing downtime.
        ❚ Select an assembly and corresponding blank. Replacement sleeves and assembly bodies also available.


40K HP Standard
The economical stainless-steel HP Standard style nozzles come in pressure ratings to match your flex or rigid lances. The 40K-HP Standard Nozzle is designed to go with lances with either right or left-hand Autoclave-type high pressure threads, a special seating design that eliminates the requirement for gland nuts and collars, wrench flats for easy installation, and offer a wide range of options for precision drilled orifices. Please specify drilling pattern, pressure and flow when ordering.

40K TLX
The stainless steel TLX Nozzles come in pressure ratings to match your flex or rigid lances. The 40K-TLX have Autoclave-type HP threads. All have wrench flats for easy installation on the lance. All offer many options for 3 or 4 rows of precision drilled orifices.

40K Button Tip Flex Lance
The Button-Tip compact stainless- steel nozzles come in pressure ratings to match your flex lances. They are ideal for cleaning small diameter tubes with small radius bends. The 40K-BT nozzles have Autoclave type HP threads. All offer many options for precision drilled orifices. Please specify drilling pattern, pressure, flow and whether right or left hand threaded when ordering.

20K-40K Male Machine Thread Lance
The Button-Tip compact stainless- steel nozzles come in pressure ratings to match your flex and rigid lances. They are ideal for cleaning small diameter tubes with small radius bends. The 40K-MMT have Autoclave-type HP threads, and offer many options for precision drilled orifices. Please specify drilling pattern, pressure and flow when ordering.